Sil-Air 15 / L55 Motor Unit

Sil-Air 15 / L55 Motor Unit

Sil-Air 15 / L55 Motor Unit

Sil-Air 15 / L55 Motor Unit

Product Reference: WC160607R
Price: £154.99 (£129.16 Excluding VAT at 20%)
In stock
** This product is currently only available for UK delivery **

Sil-Air L55 replacement motor / pump assembly as fitted to Sil-Air 15 & 20 series models.

This is a complete L55 motor unit & is supplied fitted with rubber insulating mounts, control housing containing start relay & overload protector, 1/8" BSP-P male outlet adaptor, also included is 500ml Sincom 32/e lubricant, intake air filter & instruction manual.

Werther Part Number C160607R.

The L55 is the current fit motor for Sil-Air 15 & 20 series compressors, it may also be used for earlier 15 & 20 series compressors (identified by a flat lid gasket, rather than the current O-ring gasket). The motor inlet & outlet pipes may be located in a different position / orientation on earlier, pre L55 models, this will not cause an issue with compressors that do not have a case, but on those that do have a case it's possible that oil fill access hole cut in the case may not allow access for oil filling - please check by referring to the images.

May be suitable for use with rebranded compressors marketed by Aztek, Aero-pro, Euro-tec, Revell, Rotring & others, again please refer to the images to gauge suitability.

* 17 L/Min (0.53CFM)
* 30 dbA
* 9.7Kg (with oil)
* 170 x 255 x 195mm (WxDxH)
* 220/240V, 50Hz

Product Description
Product Description

** This product is currently only available for UK delivery **

Sil-Air L55 replacement motor / pump assembly as fitted to Sil-Air 15 & 20 series models.

This is a complete L55 motor unit & is supplied fitted with rubber insulating mounts, control housing containing start relay & overload protector, 1/8" BSP-P male outlet adaptor, also included is 500ml Sincom 32/e lubricant, intake air filter & instruction manual.

Werther Part Number C160607R.

The L55 is the current fit motor for Sil-Air 15 & 20 series compressors, it may also be used for earlier 15 & 20 series compressors (identified by a flat lid gasket, rather than the current O-ring gasket). The motor inlet & outlet pipes may be located in a different position / orientation on earlier, pre L55 models, this will not cause an issue with compressors that do not have a case, but on those that do have a case it's possible that oil fill access hole cut in the case may not allow access for oil filling - please check by referring to the images.

May be suitable for use with rebranded compressors marketed by Aztek, Aero-pro, Euro-tec, Revell, Rotring & others, again please refer to the images to gauge suitability.

* 17 L/Min (0.53CFM)
* 30 dbA
* 9.7Kg (with oil)
* 170 x 255 x 195mm (WxDxH)
* 220/240V, 50Hz

Specification
Specification

** This product is currently only available for UK delivery **

Please select next action

Go back orGo to wish list

© 2024 Air Tech Equipment Ltd
Accepted Payments
Top