Iwata RG-3 Spray Gun

Ref: IW-RG-3

  • Price: 329.99 (274.99 Excluding VAT)

In Stock


  • Product Info
  • Air Requirements
The Iwata RG-3 is a compact, side fed spray gun with 0.6mm nozzle. Featuring excellent paint atomization & providing high paint flow when required, the RG-3 is capable of spraying heavier paints & metallics without issue.

Fitting the gap between airbrush & standard spray gun, the RG-3 is suited to a wide variety of work, such as Automotive, Murals, Sign work, General Painting, Larger RC & Scale Models, Varnishing, Art and Illustration (ideal for backgrounds), Hobby / Craft, Spray Tanning, Body Art.

* 0.6mm Nozzle
* Round Pattern
* 130ml Stainless steel paint cup with lid.
* Spray width 1/8" to 2-1/2" (3mm to 63mm)
* 1/4" BSP-P inlet
* Weight - 0.29Kg
* Operating instructions & cleaning brush included

** Please see the "Air Requirements" tab for information on compressor suitability.

For operating instruction / Manual (PDF, new window);

The RG-3 consumes considerably more air than a standard airbrush & many low / medium powered airbrush compressor will be unable to provide adequate airflow.

The following air consumption figures can be used to determine if you existing compressor will be suitable;

20psi - round pattern - 34.0 L/Min*
30psi - round pattern - 43.4 L/Min*

Your compressors airflow rating should be available from the compressor manual or from the manufacturer's website. Should the rating be provided in CFM, multiply the CFM rating by 28.3 to obtain the L/Min rating.

* These figures are approximate & provided for guidance only

Air Tech Equipment Ltd
Unit 3,Claggan Road, Claggan, Fort William, United Kingdom (Ex. C.Islands)PH33 6PH